What fits the MVP: AFTERMARKET PARTS

Discussion in 'Modifications' started by wood chucker, Oct 7, 2013.

  1. wood chucker Moderator

    Member Since:
    Dec 19, 2012
    Message Count:
    1,413
    Mods,
    How about we start a tacked compilation thread of what fits the MVP's and update it as we go ?

    5.56 MVP

    Factory threaded muzzles accept all 1/2"-28 industry standard muzzle devices.

    Scope mounts and bases.
    5.56 MVP two piece bases
    Varmint and Predator ship with factory installed Weaver #19 front ( Savage 99) and Weaver #36 rear (Remington 700 )

    Talley (contact Talley for Pn#)
    Warne (contact Warne for Pn#)

    Picatinny rails
    Evolution Gun Works HD Picatinny rails, 0 MOA and 20 MOA
    Product ID : 80810 and 80812

    Farrell Industries Picatinny rails, 20 MOA
    Product Code: MOSS-MVP-S

    MVP Patrol 5.56 ships with what appears to be I was WRONG.

    UTG/Leapers Picatinny rail
    Part number MNT-MB556

    One piece /monolithic integral ring scope mounts
    DNZ Game Reaper options for height and ring size ( contact DNZ for Pn# )

    Iron Sights
    Front
    Williams; Fire Sight front factory standard on all Patrol models.

    Rear
    Williams; barrel mounted open rear sight factory standard on all Patrol models.

    Extractors
    Severe duty extractors CNC machined from a solid chunk of toughened high strength steel, contact Crosshair Precision

    Triggers
    Jard Pn Mossberg 4X4/MVP short action until their catalog updates ) UPDATED
    Timney ( order the 610-S Mossberg ATR 100 short action until their catalog updates )

    Trigger guards
    ChP "Bashmaster":D trigger guard. CNC'd from Billet Aluminum and MILSPEC TypeIII hard coat anodized. Contact Crosshair Precision for Pn#

    Tromix billet trigger guard, CNC'd from Billet Aluminum and TypeIII MILSPEC hard coat anodized.
    Contact Tromix Lead Delivery Systems for Pn#.

    Extended magazine release

    ChP "Flapmaster" :D billet paddle mag release.
    Contact Crosshair Precision for Pn#

    Aluminum magazine wells
    CnC'd from 7075 aerospace aluminum, TypeIII MILSPEC hard coat anodized.
    contact Tromix Led Delivery Systems for Pn#.

    Extended mag well
    Contact Crosshair Precision for Pn#

    User installable no mod oversize/ Tactical bolt knobs
    Bolton quick load knob www.boltonquickloadknob.com/

    Stocks
    MDT LSS Chassis
    Boyds (multiple styles and options in wood and laminated )

    Barrels
    Barrels drop in: .300 AAC Blackout in various lengths and contours from Tromix
    Barrels drop in: various calibers, twists, lengths and contours, muzzle options and finishes from X-Caliber

    You spec. calibers, contours, lengths and finishes:
    Xring accuracy,
    Crosshair Precision (ChP),
    Mark Skaggs Gunsmith, Grants Pass OR.

    Black Hole Weaponry website not updated yet so ask them for part number

    Barrel nuts
    Two piece: ( handy for switch barrel rigs ) Tromix
    One piece in carbon steel and stainless steel : PTG

    Recoil lugs
    Surface ground in carbon and stainless steels in various thicknesses up to .500" !!!
    PTG

    Tools
    Barrel nut wrenches and receiver wrench/recoil lug holders from both Tromix and from PTG


    7.62 MVP

    Factory threaded muzzles 5/8"'-24 x .635 to accept all industry standard muzzle devices.

    Scope mounts and bases.
    7.62 MVP uses Rem 700 pattern two piece bases.

    Ships with Weaver ~ Front #51, rear #36
    Warne Bases M902-877
    DNZ Hunt Master

    Picatinny rails
    Evolution Gun Works HD Picatinny rails, 0 MOA and 20 MOA
    Product ID : 80820 and 80822

    MVP Patrol 7.62 ships with what may or may not be a UTG brand rail

    One piece /monolithic integral ring scope mounts
    DNZ Game Reaper ( contact DNZ for Pn# )

    Iron Sights
    Front
    Williams; Firesight front factory standard on all Patrol models.

    Rear
    Williams; barrel mounted open rear sight factory standard on all Patrol models.
    WGRS ghost ring (supplied with screw in aperture) fits receiver rear bridge, order Remington 700.
    XS sighting systems Ghost ring ( order Rem 700 )

    Triggers
    Jard Pn Mossberg 4X4/MVP
    Timney ( order the 610-S Mossberg ATR 100 short action until their catalog updates )

    Trigger guards
    ChP "Bashmaster":DCNC'd from Billet Aluminum and MILSPEC TypeIII hard coat anodized.
    Contact Crosshair Precision for Pn#

    Tromix billet trigger guard, CNC'd from Billet Aluminum and TypeIII MILSPEC hard coat anodized.
    Contact Tromix Lead Delivery Systems for Pn#.

    Extended magazine release
    Crosshair Precision .

    User installable no mod oversize/ Tactical bolt knobs
    Bolton quick load knob www.boltonquickloadknob.com/

    Stocks
    MDT LSS Chassis
    Boyds (multiple styles and options in wood and laminated )

    Barrels
    Barrels drop: in various calibers, twists, lengths, contours, muzzle options and finishes from X-Caliber

    you spec. calibers, contours, lengths and finishes:
    Xring accuracy,
    Crosshair Precision (ChP),
    Mark Skaggs Gunsmith, Grants Pass OR.
    Black Hole Weaponry website not updated yet so ask them for part number
    Barrel Swaps
    Savage small shank is a drop in. Details here





    This list keeps growing.
    If you know of something that fits, please post it and PM site staff so we can include it in the list.

    When you order from a vendor please mention that you found the info on this list here.

    Last edit 07/16/2016
    gerryd, DINKY DAU, NFA and 2 others like this.
  2. MechTech Moderator/ Damn Yankee

    Member Since:
    Aug 7, 2011
    Message Count:
    761
    Thanks for the suggestion Chucker. I have been looking to create a MVP accessory/fitment guide incorporating all the info from the Sticky threads in the MVP forum. Not a small task by any means. This would be a good start. PM inbound.
  3. Jeremy Bost New Member

    Member Since:
    Oct 15, 2013
    Message Count:
    26
    wood chucker likes this.
  4. wood chucker Moderator

    Member Since:
    Dec 19, 2012
    Message Count:
    1,413
  5. dax dayton New Member

    Member Since:
    Mar 6, 2014
    Message Count:
    20
    Timney trigger - have to measure for center of pin to center of screw
    .390 = 610-S
    .512 = 610
  6. Zagmp Member

    Member Since:
    May 23, 2013
    Message Count:
    59
    The Leaper's mount is the UTG version, from what I can tell it's the same as stock.

    Part number MNT-MB556

    Only place I've found it. http://www.leapers.com/prod_detail.php?mitem=mount&itemno=MNT-MB556

    Fits very nicely, no problems. Lifts the scope up about 3mm over the stock mounts, but I am having a hard time finding decent sub-10mm rings that don't cost a fortune.
  7. Jimmy2112 Active Member

    Member Since:
    Mar 3, 2014
    Message Count:
    342
    If using the MDT LSS Chassis, the Odin Works Extended Mag Release works very well with the chassis. Also, because the chassis can use a mil-spec AR mag catch, I'm sure most ambi mag releases will also work well to.
  8. Jimmy2112 Active Member

    Member Since:
    Mar 3, 2014
    Message Count:
    342
    wood chucker likes this.
  9. ARKLITE881South Member

    Member Since:
    Jan 22, 2014
    Message Count:
    37
    Not sure if its been posted any place else on the site, but, i put a set of Leupold Duel Dove tail LA 2 piece Remington 700 bases on my MVP 5.56 last night. I'd had them for some time, and finally tried them, PERFECT fit. They had the low twist lock rings, which with my 4x14 vortex is too short. The barrel and scope bell just touch. So, I'm guessing the medium rings will be just about right. This set up puts the vortex scope really down low on the barrel which is what i was looking for. The only problem now, might be that the spent cases might hit, the scope as i try to eject them, its close, the high rings might be the answer to that, IF it does hit with the medium rings.
  10. James Anderson New Member

    Member Since:
    Apr 2, 2014
    Message Count:
    8
    does anyone know what the difference is between the 610s and 610s-16 trigger from timney?
  11. dax dayton New Member

    Member Since:
    Mar 6, 2014
    Message Count:
    20
    The 610-a is the short version.....you have to measure the center of the screw hole to the center of pin

    .390 = 610-S
    .512 = 610
  12. James Anderson New Member

    Member Since:
    Apr 2, 2014
    Message Count:
    8
    but what about the -16 on the end of those numbers that adds another 10 bucks onto the price of the trigger?
  13. dax dayton New Member

    Member Since:
    Mar 6, 2014
    Message Count:
    20
    It should be nickel plated to add 10
  14. GrocMax Member

    Member Since:
    Jun 12, 2014
    Message Count:
    69
    MVP 223 varmint with provided scope bases, Burris 30mm Sig Zee rings= medium height will not fit any obj larger than about 48mm, 50-56 or so needs the high, anything larger extra high.

    A 50mm obj and the extra high leave about 1/2" clearance to the barrel, 50mm obj and mediums touch barrel with some MOA dialed in via ring insert.
  15. ArmyVet New Member

    Member Since:
    Jun 23, 2014
    Message Count:
    4
    I wanted to share that DNZ offers the "Hunt Master" 2 piece Scope Mount for the 7.62 / .308 MVP's.

    I had inquired about the Game Reaper, as the options on their site for fitment state only long or short actions, not a specific 5.56 or 7.62, and having talked with Mossberg about the two actions - Mossberg confirmed that the measurements are different between the two calibers.

    This is the response from DNZ after asking about the 7.62 mounts:

    We have the 2 piece Hunt Master mounts for it.
    Thanks
    Tim

    Sent from my iPhone
    In the mean time I sent another e-mail asking about the options for the Hunt Master, and once I hear back I will post those comments here as well.
    Hope this helps,
    Regards
    ArmyVet
    wood chucker likes this.
  16. Water Monkey New Member

    Member Since:
    Apr 27, 2014
    Message Count:
    13
    DNZ game reaper one piece mount medium works perfectly with my MVP Predator 5.56mm NATO
    wood chucker likes this.
  17. wood chucker Moderator

    Member Since:
    Dec 19, 2012
    Message Count:
    1,413
    List updated :)
  18. Water Monkey New Member

    Member Since:
    Apr 27, 2014
    Message Count:
    13
    FYI my DNZ isn't mounted to a picatinny rail. I removed the weaver base and mounted it straight to rifle.
  19. wood chucker Moderator

    Member Since:
    Dec 19, 2012
    Message Count:
    1,413
    Jimmy2112 likes this.
  20. Jimmy2112 Active Member

    Member Since:
    Mar 3, 2014
    Message Count:
    342
    They make a nice looking Rem 700 short mount too.

Share This Page